Printer-specific build plates

Creality K2 Plus

Image coming soon for this exact plate configuration. The selected steel, surface, live Store option and verified dimensions still control your order.

Live Store option

Rigid Steel · G10 Garolite

SKU: BP1102
Price: USD 99.99
Available: 99

No account required. Shipping is calculated at checkout using the Store shipping method configured by Holden Enterprises.

Verified plate dimensions

Working area370 × 370 mm

Working area manufacturing tolerance: nominal to -2 mm (+0 mm / -2 mm).

Overall plate size385 × 370 mm

A verified dimensional drawing will be published when available. Dimensions are not inferred from shipping or printer-bed data.

Material details

Rigid Steel

Thicker steel resists a strongly warping part pulling a thin spring sheet away from the magnetic bed. Added thermal mass can help spread heat from hotter center areas toward the outer build area.

Nominal thickness: Approximately 2.3 mm
Appearance: Silver steel
Bed temperature: Allow adequate heat-soak time for the added thermal mass.
Important: Heat spreading does not guarantee perfectly uniform surface temperature. Rigid plates do not flex like spring steel.

G10

Industrial-grade G10. Material type, thickness, construction and surface finish affect how a plate behaves.

Nominal thickness: 0.4 mm
Appearance: Clearish/translucent
Release: Let the plate cool fully to room temperature first; many prints release after cooling. If a print remains stuck, a couple of hours in a freezer can help. Where appropriate, carefully try a light dead-blow tap or a spatula under a shorter part. Avoid levering hard against the surface or forcing a sharp tool toward your hand.
Cleaning: Hand wash with Dawn dish soap and water, rinse thoroughly and dry with a plain white kitchen paper towel. Blue shop towels can leave residue. IPA or acetone may be chemically compatible but can leave residue; Dawn is the preferred cleaning method.
Glue: For recurring stubborn release, consider Vision Miner Nano Polymer Adhesive. Results depend on the filament and printing conditions.